ComfyPilotComfyPilot
模型库 / LoRA / MOSS Detail Slider
MOSS Detail Slider

MOSS Detail Slider

3058044

LoRA 67 次下载 4 喜欢 更新于 2026-11-19

底模:MOSS Image

mosstooldetaildetail sliderslidermoss image

下载模型 在源站打开

文件清单 线路:镜像(hf-mirror.com) · 切换

下载后放进对应的 ComfyUI 目录。models/ 指 ComfyUI 的模型根目录。

权重 MOSS_Detail_Slider.safetensors 47 MB 下载

说明

MOSS Detail Slider

作者:baowy

A detail slider for MOSS-Image. Controls how much micro-detail the image carries — and it applies to the whole scene, not just skin. Everyday range: −5 to +5 Tested to ±10 — neither extreme breaks the image, but they are specialty settings.

WeightResult
−5Softer overall. Skin smooth, armour reads glossy and clean, mist thickens, edges blur into haze
0Base model
+5Crisp. Metal scratches, leather grain, fabric weave, gravel and rubble all sharpen, mist thins out

What it actually touches:

  • Skin — pores, freckles, texture (negative side also drains colour, faces go pale)
  • Materials — metal plating and rivets, leather straps, cloth weave, fur strands
  • Environment — gravel, wet ground, rubble, architectural surface detail
  • Atmosphere — negative side thickens mist and softens light; positive side clears haze and hardens edges So it is not a "skin smoother". Pull it negative and the whole image goes soft and atmospheric; push it positive and everything crisps up. Notes:
  • Face shape, expression, lighting direction and composition stay largely unchanged across the range
  • At −10 skin loses essentially all texture and reads airbrushed; at +10 it reads like a raw documentary close-up
  • High positive weights can make skin go red / flushed — if that is not what you want, pull back toward +5 or below
  • Best paired with the 8-step DMD accelerator at 1.0 If you find it useful, I'd love to see your ratings, comments and generated images. ---

MOSS Detail Slider

细节滑块。控制画面的微观细节密度,而且作用于整个场景,不只是皮肤。 日常使用:−5 到 +5 实测到 ±10——两端都不会崩图,但属于特殊用途。

权重效果
−5整体变柔。皮肤平滑,装甲干净油亮,雾气变浓,边缘化进霾里
0底模原样
+5整体变锐。金属划痕、皮革纹理、布料织纹、碎石瓦砾全部清晰,雾气变薄

它实际影响的东西:

  • 皮肤 —— 毛孔、雀斑、纹理(负值方向还会抽掉血色,脸发白)
  • 材质 —— 金属甲片与铆钉、皮革束带、布料织纹、毛发丝
  • 环境 —— 碎石、湿地、废墟、建筑表面细节
  • 氛围 —— 负值加浓雾气、柔化光线;正值驱散雾霾、硬化边缘 所以它不是「磨皮滑块」。往负值拉整张图会变柔、变朦胧;往正值推所有东西都会变锐。 注意事项:
  • 全程脸型、表情、光照方向、构图基本不变
  • −10 时皮肤几乎没有纹理,呈精修感;+10 时像纪录片特写
  • 正向强度过高时,皮肤可能会出现发红 / 潮红——不想要这个效果就退回 +5 以内
  • 配合 8 步 DMD 加速 LoRA(强度 1.0)效果最好 如果对你有用,希望能看到你的推荐、评论、返图。

示例图